Basler Electric IDP-800 - Manual (Page 25)

9437600990 Rev F 19
Main View Screen
This screen (Figure 20) serves as a gateway to the IDP-800 status and control screens. It also provides
access to file transfer functions and a screen lock to enable panel cleaning. The Login button can be used
to enter the appropriate password and gain access to the configuration screens.
Figure 20. Main View Screen
Access to the Control button (and control screens) is possible only when logged into the IDP-800 with the
correct password.
IDP-800 Passwords
Four passwords protect the IDP-800 from unauthorized settings changes, control commands, and
transfers offline.
Two of the passwords are used when transferring the IDP-800 offline. When taking the IDP-800 offline,
the offline and system passwords are used. The IDP-800 is delivered with a system password of “4376”
and an offline mode access password of “basler”.
A factory-default password of “IDP8” gives access to IDP-800 configuration and control functions.
A factory-default password of “DECS4” gives access to only the IDP-800 control functions.
Password access remains in effect based on display panel activity and the limit set by the Login Duration
setting (Screen Configuration screen).
Gaining Password Access
The following example describes the process for using a password to gain configuration and control
access.
1. Press the Login button on the Main View screen.
2. Use the alphanumeric keypad to enter the appropriate password and press the Enter button. The
factory-default password is IDP8 and is case-sensitive.
Once the correct password is entered, the Main View screen is displayed with a Control button that
provides access to the control screens and a Configure button that provides access to the configuration
screens.
IDP-800 IDP-800-B Operation