Basler Electric IDP-800 - Manual (Page 48)

42 9437600990 Rev F
along with the minimum and maximum limits for the setting. Touching the setting field area displays a
numeric keypad where the new value can be entered.
The Setpoint Control screen also has system status indicators and a metering display for generator and
excitation system parameters.
Figure 55. Setpoint Control Screen
Regulation Control
Pressing the Regulation Control button accesses the Regulation Control screen (Figure 56). This screen
enables selection of the active regulation mode. The AUTO and MANUAL buttons toggle between Auto
and Manual modes. When operating in AVR mode, the Off, PF, and VAR buttons can be used to enable
or disable regulation of vars or power factor. Each change to the regulation mode requires a confirmation
via an accept/reject dialog box.
The Regulation Control screen also has system status indicators and a metering display for
generator/motor and excitation system parameters.
Figure 56. Regulation Control Screen
IDP-800-C Operation IDP-800