Basler Electric IDP-800 - Manual (Page 47)

9437600990 Rev F 41
Figure 53. Remote Thermocouple Inputs Screen
DECS Control
Access to the DECS Control screen is possible only when logged in with the appropriate password. When
logged in, a Control button on the Main View screen provides access to the DECS Control screen
illustrated in Figure 54. DECS control functions are divided between two screens: Setpoint Control and
Regulation Control.
Figure 54. DECS Control Screen
Setpoint Control
Pressing the Setpoint Control button accesses the Setpoint Control screen (Figure 55). This screen
displays the DECS AVR, FCR, power factor, and var setpoints and provides two methods of setpoint
adjustment. The “+” and “–“ buttons can be pressed to increment and decrement the active setpoint. A
specific setpoint can be entered for any of the four setpoints. Pressing the New button associated with the
setpoint to be changed accesses a Setpoint Adjustment screen that displays the current setpoint value
IDP-800 IDP-800-C Operation