Beisler 1225-4 - Manual (Page 12)

1-10
3.1 Switching on
Hint
The machine must be connected to the power and air supply before it can be
switched on.
The mains switch (1) is located at the front side of the machine beneath the
working table.
Turn the mains switch (1) clockwise until it is engaged. The grip of the switch
points to the marking „1 - ON“ now.
Press the green Reset key (2) beneath the operation device after switching
on. The main display will be imaged in the display of the operation device.
3.2 Switching off
Turn the mains switch (1) counter-clockwise until it engages feelable. The
grip of the switch now stands horizontally and points to the marking „0 –
OFF“.
3 Switch on/off, Emergency Stop, Restart
1
2