Beisler 1225-4 - Manual (Page 22)

1-20
6.3 Adjustment of the transports
1
2
You can adjust the transportation facilities within the sewing head:
Permanent transport
The right-handed lever (2) influences the permanent transport, which is
active during the complete seam. The adjustment range is from -10 to +6.
The higher the adjustment (in the plus range), the more the cloth will be
stopped; the lower the adjustment (in the minus range), the more the cloth
will be stretched.
Additional transport
The left-handed lever (1) influences the additional transport that is pro-
grammable in the machine’s control and shall bring more width at certain
positions of the seam.
The adjustment range is between 0 and +16. The higher you work in the plus
range, the more lining will be stopped additionally at the programmed positi-
ons.
6.4 Additional settings at the operation device
The operating personell may not access the setup pages of the machine
control. This is reserved to experienced technicians which were trained
especially. The access to the setup pages requires the entry of the machine
code.
Attention
Possible damage to the machine due to inadequate programming! The
machine code should be kept as a secret and only be accessible to persons,
which are allowed and qualified to program and setup the machine.
The only exception to these regulations are two settings:
• selection of the operation language;
• setting of the contrast of the display.