Beisler 1225-4 - Manual (Page 7)

1-5
1.6 Contents of this manual
The Operating Manual of this Single-head Serging Unit, Series 1225/4
contains the following parts:
1. Operating Instructions
2. Mechanics Manual
3. Electrical wiring plans
4. Parts list
5. Operating Manual of the sewing head
Please check the documents delivered with the machine for completeness.
1.7 Range of validity
This operating manual is valid for Serging Units manufactured by Beisler
named ‘Single-head Serging Unit, Series 1225/4’.
This operating manual is not valid for the sewing head applied in the machi-
ne. Please refer to the operating manual of the sewing head delivered with
the machine, for which we don’t take any liability.
Further security advice (verbal and written) for this machine or the compon-
ents will not be repealed by this manual.
1.8 Copyright
© 1999 Beisler GmbH, Hösbach
Single-head Serging Unit
The ‘Single-head Serging Unit, Series 1225/4’ and this operating manual with
all parts are protected on copyright. Manufacture without license will be
prosecuted by law. All rights reserved on this operating manual, including
reproduction in any thinkable way, either by copying, printing, on any data
recording media or in translated form. Reproduction of this operating manual
- even in extracts - only with written approval by Beisler GmbH.
This operating manual contains a description of the product, but no promise
of certain qualities or results of use. The operating manual has been proved
before delivery. The Beisler GmbH takes the liability, that this operating
manual if free of errors reducing its value for the estimated use. The editors
don’t take liability for consecuting damage arising through application of the
operating manual. We are always thankful for hints and ideas.
The technical standard of the common delivery of product and operating
manual by the Beisler GmbH is decisive, if not other information is given.
Technical changes without prior notice are reserved, previous operating
manuals loose validity.
The general conditions of sales and delivery of the Beisler GmbH are valid.
Do you have questions or problems with installation or putting into operation?
Don’t hesitate to call us.
Beisler GmbH
Frohnradstr. 10 - D-63768 Hösbach
Tel: (+49) 6021 / 50 19 0
Fax: (+49) 6021 / 50 19 10