Beisler 1225-4 - Manual (Page 35)

2-9
3.4.3 Store error messages
S E T U P
- 0 2
E R R O R P A R T I A L T O T A L
- - : - - 1 2 : 1 5
0 4 : 3 5
3 0 : 0 0 %
3 8 : 2 0
2 7 : 1 5
4 0 : 0 0 %
- - : - -
- - : - -
The last 16 error messages are documented on this page. They are listed
together with the time of their issue and the time period until the issue of the
next error message.
Press the Special key to leave this page.
3.4.4 Activate access code
Use the Plus key to activate (left) or deactivate (right) the icon of the access
code. If the access code is activated, the code must be entered before a
setup page can be opened.
3.5 Setup page -03
- 0 3
S E T U P
A
S
Six icons are displayed here, but only two of them are enabled. To select the
setup page of a function, position the cursor on the respective icon and press
the Special key.
3.5.1 Presser foot
Hint
If the presser foot cannot be enabled, you will first have to switch off output
F1 on setup page -10. Further explanations are contained below.