Beisler 1710-5 - Manual (Page 17)

1-15
5.5 Sewing head
1
2
3
4
1 Sewing head
2 Speed control transportation belt
3 Photo cell seam start/end
4 Sewing foot
With this machine you can sew zippers and back-up tape on large quantities
of left-handed fly pieces. The fly pieces are aligned at the stop bar beneath the
transportation belt. Then the start button must be pressed.
The transportation belt (driven by the sewing motor; speed adjustable at the
sewing head (2)) will be lowered what inserts fly piece, zipper and back-up
tape under the sewing foot.
The beginning of the fly piece is detected by the photo cell (3) which starts the
sewing. The same photo cell detects the end of the fly piece, which is the end
of the seam.
5.6 Cutting device
1
2
3
4
5
6
After the fly piece has been sewed at the sewing foot (1), it will be pushed
forward through the guiding (2). Another fly piece can be aligned and the
sewing can be started.