Beisler 1710-5 - Manual (Page 22)

1-20
7 Cleaning and Maintenance
DANGER
Possible injuries due to improper execution of cleaning and maintenance
duties! The operator of the machine may only carry out the cleaning and
maintenance duties described in this section. Further measures are reserved
to the responsible service technician.
7.1 Cleaning of the machine
Hint
To achieve the value and daily functionality of this machine, it should always
kept clean and free of production waste.
Clean the machine components as described:
Operation device clean it using a dry, clean and lint-free cloth; heavy
dirt can be removed using a slightly saturated cloth.
Complete machine use a vacuum cleaner daily and if required to clean
the machine.
7.2 Maintenance
ATTENTION
Damage to the machine due to inadequate maintenance possible! The
execution of the maintenance duties should be reserved to experienced and
especially qualified staff. The required measures are described in the
mechanics manual in the second part of this documentation.
7.2.1 Check oil level in the sewing head
There is a window in the sewing head, where you can check the level of the oil
contained in the sewing head. Check the oil level daily and fill in required oil
immediately.
ATTENTION
Damage to the sewing head due to low oil! Check the oil level in the sewing
head daily and fill in missing oil immediately. Otherwise, the sewing head can
be damaged.
Information on the oil level check and filling in of missing oil is contained in the
operating instructions of the sewing head which is part of the machine docu-
mentation.
7.2.2 Empty water separator
The machine is equipped with a pressured air supply unit, where an automatic
water separator is mounted.
If there is water in the cup, it will be released automatically if the pressured air
supply is closed.
7.3 Troubleshooting hints
Whenever an error or fault appears or an error message is imaged in the
display, the responsible technician have to be contacted.