Beisler 1710-5 - Manual (Page 24)

2-2
1 Delivery, Transportation, Packing
1.1 Range of delivery
Hint
Check immediately after receiving the machine, whether all parts are delivered
completely and without any obvious damage. Later compensation claims
cannot be accepted.
If you detect damage to the transportation packing of the machine which may
indicate damage of the machine or parts of it, you should claim this immedia-
tely at the transporting company. This is the only way to keep all rights
against the transporting company.
1.2 Packing
The company Beisler tries to use recycleable packing materials only. Please
assure that these materials are treated in accordance to the local regulations.
1.3 Transportation
Generally it is possible to move the machine. Please follow these regulations:
1. Cut off the power and compressed air supply and make the pneumatic
system free of pressure.
2. Fix movable and loose parts.
3. Lift the machine frame evenly with a suitable transportation device; assure
that possible additional devices (e.g. stacker) are lifted with the machine.
Loosen the breaks at all transportation rolls, if the machine is equipped
with this option.
4. Move the machine carefully to the desired location.
ATTENTION
Attention during transports on sloping areas! The machine’s weight produces
high pulling power. Be sure to place the machine in environments, which are
suited for the machine.
1.4 Storage
If no other agreements are fixed for the storage of the machine, the following
requirements must be fulfilled:
1. In closed rooms only.
2. Temperature range -10 ... +45° C.
3. Humidity max. 80 %, not condensing.
ATTENTION
The machine can be damaged due to storage and/or transportation under
inacceptable conditions. Possible damage may be invisible from the outside.