Beisler 1710-5 - Manual (Page 26)

2-4
1. Connect the compressed air hose (2) with a connector of you compressed
air system.
2. Open the compressed air supply.
3. Use the control grip (1) to adjust the machine’s compressed air pressure to
6 bar, readable at scale (3).
4. Water contained in the water separator (4) will be released automatically
when the machine is made free of pneumatical pressure.
2.3 Electrical Installation
Hint
All works at electrical components of this machine may only be carried out by
qualified staff in accordance to IEC 364 and DIN EN 60204-1.
DANGER
Hazardous electrical voltage inside the switchcase! Cut off the power supply to
avoid dangerous injuries. Please obey the safety regulations given at the
beginning of the Operating Instructions and the common rules for accident
prevention.
ATTENTION
The machine can be destroyed by a connection to a wrong electrical voltage!
Please check, whether the information given in section ‘Technical data’ meet
the local conditions before executing the electrical installation.
1. Use the power cord which is located at the rearside of the machine.
2. Plug it into a socket.
3. Lay the cable in a way that the danger of stumbling is avoided.
2.2.2 Connect compressed air
1
2
3
4