Beisler 1710-5 User Manual
Page 27
2-5
DANGER
Danger to life in the case of unsufficient grounding! Ground the machine in
accordance to DIN EN 60204-1.
2.4
Putting into Operation
As a factory setting this machine has been adapted to the requirements of the
customer. The first putting into operation can be done easily:
1. Level the machine to a horizontal stand.
2. Execute electrical and pneumatical connection.
3. Switch the machine on with the main switch on the front side of the machi-
ne.
4. Check all safety installations on functionality.
DANGER
The machine may only be used for production after the safety installations had
been checked. If safety installation does not function, they must be repaired
first.
As a factory setting, several sewing programs are contained in the memory of
the machine. You can use one of these programs or program your own.