Beisler 1710-5 - Manual (Page 7)

1-5
1.6 Contents of this manual
The Operating Instructions for the ‘Fly Piece Unit, Series 1710/2’ contains the
following parts:
1. Operators Manual
2. Mechanics Manual
3. Electrical wiring plans
4. Parts list
5. Operating Manual of the sewing head
Please check the documents delivered with the machine for completeness.
1.7 Range of validity
This operating manual is valid for machines manufactured by Beisler named
‘Fly Piece Unit, Series 1710/2’.
This operating manual is not valid for the sewing head applied in the machine.
Please refer to the operating manual of the sewing head delivered with the
machine, for which we don’t take any liability.
Further security advice (verbal and written) for this machine or the components
will not be repealed by this manual.
1.8 Copyright
© 1999 Beisler GmbH, Hösbach
Fly Piece Unit
The ‘Fly Piece Unit, Series 1710/2’ and this operating manual with all parts are
protected on copyright. Manufacture without license will be prosecuted by law.
All rights reserved on this operating manual, including reproduction in any
thinkable way, either by copying, printing, on any data recording media or in
translated form. Reproduction of this operating manual - even in extracts - only
with written approval by Beisler GmbH.
This operating manual contains a description of the product, but no promise of
certain qualities or results of use. The operating manual has been proved
before delivery. The Beisler GmbH takes the liability, that this operating manu-
al if free of errors reducing its value for the estimated use. The editors don’t
take liability for consecuting damage arising through application of the opera-
ting manual. We are always thankful for hints and ideas.
The technical standard of the common delivery of product and operating
manual by the Beisler GmbH is decisive, if not other information is given.
Technical changes without prior notice are reserved, previous operating manu-
als loose validity.
The general conditions of sales and delivery of the Beisler GmbH are valid.
Do you have questions or problems with installation or putting into operation?
Don’t hesitate to call us.
Beisler GmbH
Frohnradstr. 10 - D-63768 Hösbach
Tel: (+49) 6021 / 50 19 0
Fax: (+49) 6021 / 50 19 10