Beisler 1710-5 - Manual (Page 21)

1-19
6.4.1 Select operation language
Position the cursor on the program number and press the Minus key once.
This will be displayed:
D : 8 0 0 0 P R O G .
0 0 0
X X X
D E U T S C H
Use the arrow keys to move the cursor on the displayed operation language
(here: deutsch = german) and press the Plus key, until the desired operation
language is displayed.
Move the cursor back on „000“.
Hint
The descriptions in the sewing programs will always be displayed in the
language that had been used to enter them.
6.4.2 Adjust display contrast
Open page „Program 000“ (see 6.4.1) and position the cursor on the half-filled
circle symbol. Press the Plus or Minus key to adjust the contrast of the
display.
Position the cursor on „000“ and press the Plus key to select a sewing pro-
gram.