Beisler 1710-5 - Manual (Page 9)

1-7
2 Preliminary remarks
2.1 Limitation of liability
We guarantee the faultless functioning of our product in accordance with our
advertising, the product information edited by the Beisler GmbH and this
manual. Further product-features are not guaranteed. We take no liability for
the economy and faultless function if the product is used for a different purpo-
se then that described in the chapter „Use as agreed“.
Compensation claims are generally impossible, except if intention or culpable
negligence by the Beisler GmbH is proved, or if assured product-features are
not provided. If this machine is used in environments, for which it is not suited
or which do not represent the technical standard, we are not responsible for
the consequences.
We don’t accept responsibility for damages at installations and systems in the
surroundings of this machine, which are caused by a fault of the product or an
error in this manual.
We are not responsible for the violation of patents and/or other rights of third
persons outside the Federal Republic of Germany.
We are not liable for damages, which result from improper operations accor-
ding to this manual. We are not liable for missed profit and for consecuting
damages due to non-regardance of security advices and warning hints. We
don’t accept liability for damages which resulted from the use of tools and
accessoires which are not delivered and/or approved by the Beisler GmbH.
The products of the Beisler GmbH are designed for a long life. They represent
the standard of technique and science and were checked on all functions
individually before delivery. The electrical construction corresponds to the
current norms and regulations, particularly DIN 5713 / VDE 0113. Beisler
GmbH is doing product and market research for the further development and
permanent improvement of their products. In the case of faults and/or technical
trouble please contact the Beisler GmbH service staff. We assure that suitable
measures will be done immediately.
The Beisler GmbH guarantee regualtions are valid, which we will send to you
on demand.
2.2 Guarantee regulations
We guarantee the fault-free functioning of the ‘Fly Piece Unit, Series 1710/2’
according to this operating manual except the tools for a time range of six
months after delivery. If the machine is used in double- or triple-shift operation,
the term of guarantee is reduced to three or two months.
The term of guarantee starts with the date of delivery to the customer, indepen-
dant from the time of putting into operation. Guarantee will be spoiled, if the
machine isn’t installed and operated according to this operating manual and
the regulations given by the Beisler GmbH staff. A cost-free repair is only
possible, if all regulations considering storage, transportation and putting into
operations have been obeyed.
Customers and third persons may only mesh with the machine after getting a
written approval by the Beisler GmbH. The Beisler GmbH takes no responsibi-
lity for injuries and damages arising from non-obeyance of this stipulation. All
warranty will be spoiled in this case.
The Beisler GmbH takes no responsibility for faults of the machine as conse-
quence of defective or functional faulty equipment in the surrounding of the
machine or by the use of accessoires, which were not delivered by the Beisler
GmbH.
The general conditions of sale and delivery of the Beisler GmbH are valid.