Functions of the machine – Beisler 2112-4 User Manual

Page 17

Advertising
background image

- B 17 -

Short Seam Automat 2112-4 Working Instructions

Beisler Automated Sewing Equipment

B.2

Functions of the machine

Fig. 6/7

Fig. 6

Fig. 7

B.2.5 Left slash selvage

The machine cycle "Clipping left slash selvage and sewing
it to the left trousers component" is performed as follows:
•

The left slash selvage is lined up manually at the pick-
up plate.

•

The slash selvage is clipped, crimped over by the folder
and picked up.

•

The left trousers component is positioned manually on
the working plate.
The folder transports the slash selvage to the left trou-
sers component and puts it down.

•

The trousers component with the slash selvage is au-
tomatically transported by the transport system to the
sewing head where it is tucked.

•

The finished sewing piece is then blown off the workta-
ble with compressed air.

B.2.6 Lining up the left slash selvage

Ideally, the slash selvage and the left trousers component
are premarked by a gusset. If a gusset is not available,
the line-up position is marked with tape or with a felt pen
at the working plate or at the pick-up plate.

Slash selvage line-up position, Fig. 6:

The slash selvage clamp 3 is open during the line-
up process.
The slash selvage 2 is lined up at the stop rail 4 of
the pick-up plate. The exact position to the cutter 1
is marked by the gusset in the slash selvage.

Slash selvage clamp, Fig. 6:

The slash selvage clamp 3 closes and secures the
slash selvage while the cloth material is clipped and
then crimped over.

Crimping over and picking up the slash selvage, Fig. 7:

The folder 2 moves right to the pick-up plate 3. The
slash selvage is clipped by the cutter 1 and then cr-
imped over and picked up by the folder clamp 4.
The left, rear cutter 6 of the working plate opens, the
front cutter 5 is passive and remains concealed in the
working plate.
The light of the positioning lamp 7 supports the li-
ning up of the gusset of the left trousers part to the
cutter 6.

Advertising
This manual is related to the following products: