Beisler 2112-4 - Manual (Page 60)

- C 60 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.5 Machine set-up
Cutter adjustment:
The depth of cut of the gusset is adjusted for all three cut-
ters using different settings.
•
The depth of cut of the two cutters of the working plate
for the gusset of the left and right trousers components
is changed by rotating the adjusting wheel
1.
• The depth of cut of the gusset in the left slash selva-
ge depends on the cutter block's mounting position. The
mounting angles
2 have slots. By repositioning the
cutter block in the slots, the cutter can be positioned
at an exact distance to the stop rail
4 of the pick-up
plate.
• The vertical position of the cutters is set by repositioning
the cutter block in the slots of the vertical angle arm
3. Note that the lowered cutters must be positioned
flush with the upper edge of the working plate or of the
pick-up plate.
Fig. 22
Fig. 22
NOTE - Cutting position alignment!
The two cutters for the gusset in the left slash selvage and
in the left trousers component must be aligned to each
other in a way that ensures that both cutting positions are
exactly flush.