Beisler 2112-4 - Manual (Page 44)

- C 44 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
C.4
Operation and shut-down
C.4.1 Working with the machine
Factory settings:
The program control of the machine is equipped at the
factory with two standard programs:
•
Sewing program M 01 with five different seams for
"crimping over and sewing pocket edge" (see part D,
programming instructions).
• Sewing program M 02 with one seam each for tuck-
ing the left slash selvage (12) and the right slash sel-
vage (11) on the trousers component.
C.4.2 Machine shut-down
When the machine is to be shut down, it must be discon-
nected from all supply sources.
Disconnecting the machine from the power supply
system:
1. Turn machine off using main switch. Move switch to
position "0".
2. Remove power plug from socket and protect it against
accidental reconnection.
Disconnecting the machine from the compressed air
supply system:
1. Shut off on-site compressed air.
2. Remove compressed air hose plug from terminal unit.
NOTE - Dust-proof protection!
If the machine is to be shut down for an extended period
of time, it should be covered with a plastic tarpaulin.