Beisler 2112-4 - Manual (Page 31)

- B 31 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
B.3
Operation
Fig 21
Fig. 21
B.3.11 Controlling machine cycle
The complete process of the sewing programs is controlled
by using the two footswitches, Fig. 21:
•
Footswitch for slash selvage clamp 1
• Footswitch for machine operation 2
Each sewing program offers several alternatives (modes)
for controlling the process.
The sewing program M 01:
"Crimping over and sewing pocket edge" which contains
five different seams is controlled exclusively by using the
footswitch for machine operation 2.
The sewing program M 02 with seam 12:
"Crimping over left slash selvage and sew onto left trou-
ser component" is controlled by using both footswitches.
•
The footswitch for the slash selvage clamp 1 closes
the slash selvage clamp after the slash selvage has
been inserted,
• The footswitch for machine operation 2 controls the
entire subsequent process of the sewing programm.
The sewing program M 02 with seam 11:
"Sewing right slash selvage to right trousers component"
is controlled exclusively by using the footswitch for ma-
chine operation 2.
The sewing program M 02 with seam 13:
"Test seam" is also controlled by using the footswitch for
machine operation 2.