Programming – Beisler 2112-4 User Manual

Page 77

Advertising
background image

- D 77 -

Short Seam Automat 2112-4 Working Instructions

Beisler Automated Sewing Equipment

D.3

Programming

D.3.1 System menu

Move clamp by hand. If the numeric value (mm) changes,
the sensor is operational.

•

Press

 key exit menu.

Setting clamp travel steps

Switch machine on and allow to reference (perform RE-
SET) (see also Service Instructions).

•

Press

 key.

•

Press

 key (diagnostics).

•

Press

% key.

•

Press

 key (clamp transport).

•

Press

% key.

•

Press

 key (clamp motor steps).

•

Press

% key.

Set travel steps using reference switch SO4:

•

at switch 735 mm

•

right stop 00 mm

Displaying total piece counter:

With this counter, the total number of finished pieces can
be displayed. The counter cannot be reset.

•

Press

 key.

•

Press

 key (additional programs).

•

Press

 key (piece counter).

•

Press

 key exit menu.

The number of pieces : 0000000 is displayed.

Eprom seam parameters:

This function allows to copy the factory-programmed fi-
xed seams from the Eprom back to the sewing program.

•

Press

 key.

•

Press

 key (init parameters).

•

Press

 key (Eprom seam parameters).

•

Enter seam number using numeric keypad.

Advertising
This manual is related to the following products: