Operation – Beisler 2112-4 User Manual
Page 35
- B 35 -
Short Seam Automat 2112-4 Working Instructions
Beisler Automated Sewing Equipment
Controlling machine cycle in Mode 07:
1. Depress footswitch for machine operation:
• The folder moves right to the pick-up plate.
• The front cutter "right trousers component" opens,
2. Depress footswitch for machine operation and keep
depressed:
• Vacuum is activated.
• Line up and smooth out right trousers component.
3. Release footswitch:
• The front cutter "right trousers component" cuts,
the slash selvage stop swivels to the trousers com-
ponent.
• Line up right slash selvage to right trousers com-
ponent at stop.
4. Depress footswitch for machine operation:
• The folder moves left.
• The main clamp moves to the insertion station and
picks up the sewing pieces.
5. Depress footswitch for machine operation:
• Further machine cycle is fully automatic:
The main clamp transports the sewing pieces to
the sewing head.
The sewing pieces are tucked and blown off from
the working plate with compressed air.
The main clamp returns to its start position.
The next machine cycle starts.
NOTE - Supplying sewing pieces!
If the fully automatic machine cycle was started, the next
sewing pieces can be lined up.
The footswitch for machine operation remains deactiva-
ted until the main clamp reaches its start position; after that,
the next machine cycle can be started.
B.3
Operation
B.3.14 Start mode "Right slash selvage"
The machine cycle "Sew right slash selvage to right trou-
sers component" can be performed in two different mo-
des (Mode 06, Mode 07). The factory setting is Mode 07
which starts a largely fully-automatic machine cycle. Howe-
ver, this requires that the sewing program M 02 with seam
11 has been ses.
Controlling machine cycle in Mode 06:
1. Depress footswitch for machine operation:
• The folder moves right to the pick-up plate.
• The front cutter "right trousers component" opens,
2. Depress footswitch for machine operation and keep
depressed:
• Vacuum is activated.
• Line up and smooth out right trousers component.
3. Release footswitch:
• The front cutter "right trousers component" cuts,
the slash selvage stop swivels to the trousers com-
ponent.
• Line up right slash selvage to right trousers com-
ponent at stop.
4. Depress footswitch for machine operation:
• Further machine cycle is fully automatic:
The folder moves left.
The main clamp transports the sewing pieces to
the sewing head.
The sewing pieces are tucked and blown off from
the working plate with compressed air.
The main clamp returns to its start position.
The next machine cycle starts.
NOTE - Supplying sewing pieces!
If the fully automatic machine cycle was started, the next
sewing pieces can be lined up.
The footswitch for machine operation remains deactiva-
ted until the main clamp reaches its start position; after that,
the next machine cycle can be started.