Beisler 2112-4 - Manual (Page 90)

Short Seam Automat 2112-4 Working Instructions
- D 90 -
Beisler Automated Sewing Equipment
D.3
Programming
D.3.6 List of global parameters
No. Programmable global parameters (F2)
24
DUR.LIFTING TABLE SINKS:
Lower lift table / duration
25
TILL FABRIC CLAMP FORW.:
After footswitch is released, time until pocket bag clamp closes / time interval
26
TILL SCISSORS CLOSED:
Time until scissors close / time interval
27
DURATION SCISSORS CUTS:
Cutting action of scissors / duration
28
TILL FABRIC CLAMP OPEN:
After cutting action, time until clamps opens / time interval
32
BLOW OUT THE PART ....:
Blow off sewing piece / duration
33
CLAMP MOVES TO STACKER:
Transportation of the sewing pieces / duration
35
THREAD CATCH. "UP" POS:
Thread lever in top position / duration
36
SWITCH ON POS.OF TRIMM.:
Switch-on position for thread cutting: Input value 01-255
37
TRIMMING SPEED ......:
Speed during thread cutting
38
DURATION OF TRIMMING:
ON duration for thread cutting
39
THREAD CATCH.TURNS BACK:
Thread lever reversing angle
40
PROCESS IN STEPS .....:
Gradual operation