Beisler 2112-4 - Manual (Page 97)

- D 97 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
D.3.12 Level 2 special parameters / Lists
Parameter setting for level 2 submenus
The following section describes the special parameters that
are set in lists. When a submenu is requested, only tho-
se positions of the parameter list are displayed that refer
to the machine function. All other positions of the entire
parameter list can be browsed.
Browse through a list:
• Press
0 or / key.
Move to a line in the list:
• Press
# or $ key.
Special parameter menu
&+2?3A

F1 Back to start level
F3 Select start modes, list
F4 Set upper part parameters, list
F5 Set stitch lengths and bar tacks, list
F6 Parameters for clamp transport, list
Selecting start modes:
Two modes can be set in this menu:
•
Start mode,
• Blowing mode.
• Press
2 key.
Change parameters:
• Press
% key.
• Insert new value using numeric keypad or
• Press
0 or / key.
Confirm input:
• Press  key.
Settable values:
Start mode
The selected start mode determines how the machine
operation is started and executed. Four modes are availa-
ble:
•
Mode 00,
• Mode 01,
• Mode 02,
• Mode 03,
• Mode 04,
• Mode 05,
• Mode 06,
• Mode 07,
The individual settings for machine operation are described
in Section B.3.10, Machine operation.
Blowing mode
When this mode is selected, the sewing piece is smoo-
thened after the sewing process before it is transported
to the stacker.
•
00, off
• 01, on, only parts blowing Y47
• 02, on, only slash selvage blowing Y46
• 03, on, eingeschaltet parts blowing Y47 and slash
selvage blowing Y46