Beisler 2112-4 - Manual (Page 81)

- D 81 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
D.3.1 System menu
Testing the thread cutter:
By entering a three-digit value in global parameter 35, you
can determine when the thread cutter is activated. The
input must be checked for a machine cycle and corrected
if required.
• Press  key.
• Press
 key (diagnostics).
• Press
 key (sewing motor).
• Press
 key (thread cutter).
• Enter value using numeric keypad.
Start or stop machine cycle.
• Press
 key.
Entering mechanic code:
Service personnel can enter an individual code that pro-
tects the system menu submenus from unauthorized
access.
• Press
 key.
• Press
 key (additional programs).
• Press
 key (mechanic code).
• Enter code using numeric keypad. The code may con-
sist of letters or numbers or of a combination of both.
To enter letters, hold the required color-coded function
key depressed and press the corresponding color-co-
ded number key for the letter on the numeric keypad.
D.3 Programming
D.3.2 Service menu start level
Loading variables from the memory card:
All variables (global parameters/special parameters) can
be downloaded from the memory card to the program con-
trol memory to reestablish the machine configuration.
• Insert memory card into slot until stop.
• Press  key.
• Press
 key (memory card).
• Press
 key (card --> all variables).
Confirm safety prompt.
• Press
% key.
NOTE - Current configuration!
If this function is used to download all variables from the
memory card to the program control, all current sewing
programs will be overwritten.
Running clamp motor in permanent test:
The clamp motor can be run permanently to check for
constant machine movement.
• Press
 key.
• Press
 key (diagnostics).
• Press
 key (clamp transport)
• Press
 key (clamp motor permanent test)
Confirm safety prompt.
• Press
% key
The clamp motor runs permanently until it is stopped. To
stop the motor:
•
Press program stop switch and unlock switch.