Beurer GL 50 evo (mgdl) - Manual (Page 13)

Beurer GL50 evo mg/dL 13
3.5 Test strips
Front Rear
1 Gap for blood input
2 Handle
3 Contacts
You can identify the rear by the contact tracks.
Insert the test strip into the device so
that the contacts are pointing inside
the slot.
Make sure that the front of the test
strip is facing you.
Note
Read carefully the following information on handling and storing your test strips. The test strips will
only provide accurate measured results if all notes are followed.
Warning
Use each test strip only once and for one patient only!
Handling test strips
Note
• Securely close the test strip box immediately after taking out a test strip.
• Do not use the test strips if they have expired. The expiry date is located next to the egg timer sym-
bol on the box or on the respective fi lm packaging of the individual test strips. .