Beurer GL 50 evo (mgdl) User Manual

Page 18

Advertising
background image

18

Beurer GL50 evo mg/dL

5 t

aking

measurements

Warning

• If the protective disc on a lancet needle has already been removed, do not use the lancet needle.

• If you drop the lancing device with an inserted lancet needle, carefully pick it up and dispose of

the lancet.

Important

• Use the lancing device only with lancet needles from the same manufacturer. Using other lancet

needles may prevent the lancing device from working properly.

• If you are using a third-party lancing device, please read the accompanying Instructions for use.

5.1 Preparing to take a blood sample

1

Choose a part of the body from which to take a blood sample
The lancing device is intended for taking blood samples from the fingertip or other body parts

such as the palm of the hand, forearm or upper arm. We recommend taking blood samples

from the fingertip. To make the procedure as painless as possible, do not take samples directly

from the centre of the fingertip, but slightly to either side.

Warning

In the event of suspected hypoglycaemia: take blood from the fingertip only. Reason:

changes to blood glucose levels can be detected quickly in blood samples taken from the

fingertip.

• Blood samples from the fingertip and samples taken from another body part (AST) may pro-

duce completely different results. It is essential to seek medical advice before taking meas-

urements from other body parts.

2

Prepare all parts
Prepare the following items: GL50 evo blood glucose monitor (A), test strip box or test strips

in film packaging (D) and sterile lancet needles (E). You will also need the AST cap for meas-

urements on other parts of the body (B).

Make sure that the sliding switch for on/off is in the “on” position

.

3

Wash your hands
Wash your hands with soap and warm water before taking a blood sample. This not only en-

sures optimal hygiene but also encourages good blood circulation at the puncture area on the

finger. Dry your hands carefully. Also ensure that the puncture area is hygienically clean when

taking blood samples from other body parts (AST).

Warning

If you have used alcohol for cleaning, ensure that the area has fully dried prior to measuring.

Advertising