Beurer GL 50 evo (mgdl) - Manual (Page 30)

30 Beurer GL50 evo mg/dL
6.2 Displaying average blood glucose values
You can display the average measured blood glucose value from the last 7, 14, 30 and 90 days.
1 Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2 Rotate the scroll wheel until the arrow is pointing towards “Average value”, then press the
scroll wheel to confirm.
3 Use the scroll wheel to select the desired marking (O, , or ) for which you want to dis-
play the average values.
4 Press the scroll wheel to display the respective quantity of measured values in the markings.
6.3 Evaluating measured values on a PC
The GL50 evo monitor features an integrated plug-in USB stick. The blood glucose evaluation soft-
ware GlucoMemory is installed on the USB stick (for position of the USB connection, see page 11).
The GL50 evo is compatible with Diabass and SiDiary.
The blood glucose evaluation software GlucoMemory is pre-installed on the monitor’s USB stick. You
do not need to install the software locally on a PC. This software enables you to evaluate your meas-
ured values, add insulin doses and print or export your results as a PDF or CSV file. The software helps
you and your GP to better monitor your blood glucose level.
For more information, please read software manual for the GlucoMemory software. Including all the
necessary information and a detailed description of how to use the software (in English and German).
Note
• An effective evaluation is only possible if you have set the date and time correctly (see “Setting the
date and time” on page 15).
• Measurements cannot be taken while the USB stick is connected to a PC.
• The measurements remain saved on the blood glucose monitor when the USB stick is removed from
the PC.
• It is not possible to save software entries on the USB stick; Values are read only.