Beurer GL 50 evo (mgdl) - Manual (Page 15)

Beurer GL50 evo mg/dL 15
4.2 Making and changing basic settings
1 Setting the date and time
To activate the device, set the sliding switch for on/off to setting “(on)”.
on off
The sliding switch for on/off serves as a key lock for the scroll wheel.
Note
You must set the date and time. Otherwise, you will not be able to save your measured values
correctly with a date and time and access them again later.
The time can be displayed in 12-hour format or 24-hour format.
1. Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll
wheel.
3. Rotate the scroll wheel until the arrow is pointing towards “date/time”, then press the scroll
wheel.
4. Press the scroll wheel. Set the year by rotating the scroll wheel, then press the scroll wheel.
5. Rotate the scroll wheel to next setting point and press the scroll wheel. Use the same pro-
cedure to set the month, day, 24 h or 12 h mode, hour and minute.
6. To save the settings, rotate the scroll wheel until the arrow is pointing towards “save” and
confirm by pressing the scroll wheel.
2 Setting the alarm
You can set an alarm on the blood glucose monitor. An acoustic signal sounds to the set alarm
time. You can set 4 different alarm times. To set an alarm, proceed as follows:
1. Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll
wheel to confirm.
3. Rotate the scroll wheel until the arrow is pointing towards “alarm”, then press the scroll wheel.
4. Choose one of the four alarm times with the scroll wheel, then press the scroll wheel.
5. Rotate the scroll wheel until the hour is marked, then press the scroll wheel. Now set your
desired alarm hour by rotating the scroll wheel and press the scroll wheel to confirm.
5. Use the same procedure to set the alarm minute.
6. In order to start the alarm, rotate the scroll wheel to “on” and press the scroll wheel.
7. In order to turn off the alarm, rotate the scroll wheel to “off” and press the scroll wheel.