Beurer GL 50 evo (mgdl) User Manual
Page 31
Beurer GL50 evo mg/dL
31
Evaluating measured values on the PC
1
The blood glucose monitor must be switched off.
Insert the monitor’s USB connector into a free USB
port on your PC. In the event that the measuring
device is not recognised, please try using another
active USB point.
2
“USB connected” is shown on the display of the
blood glucose monitor. Saved data can now be
viewed on your PC.
3
See the information on evaluating values in the software manual.
Alternatively, you can transfer the measured values to your smartphone tablet using the optional Blu-
etooth
®
adapter. You can download the Beurer HealthManager App and Software free of charge. For
further, information please consult the instructions for use of the Bluetooth
®
adapter.
7 s
toring
,
maintaining
and
disinfecting
the
device
Storing
Keep the Beurer GL50 evo blood glucose monitor in the case supplied after each measurement and
do not expose it to direct sunlight.
Note
• Do not store the device, test strips and control solution in your vehicle, in the bathroom or in a cool-
ing appliance.
• Retain these Instructions for use.
• Remove the batteries if you do not intend to use the device for a prolonged period of time.
• Only clean the device when it is switched off.
7.1 Maintenance
Clean the surface of the device using a soft, slightly damp cloth (water or a mild cleaning solution).
Dry the device using a lint-free cloth.
Make sure that moisture does not enter the test strip insertion slot. Do not spray cleaning agent di-
rectly on the device. Do not submerge the device in water or any other fluids and make sure that no
fluids can enter the device.
7.2 Disinfection
Please comply with the generally applicable guidelines on disinfection when using the device on dif-
ferent persons. Do not submerge the device in disinfection solutions or any other fluids and make
sure that no fluids can enter the device.
The cap on the integrated lancing device can be disinfected with 70 – 75% alcohol. Disinfect the cap
at least once a week and submerge the cap in alcohol for approx. 10 minutes. Allow the cap to air dry.