Compuprint 3056 - Manual (Page 27)

18
NLQ (green)
Lights up when Near Letter Quality is selected using Font button.
Draft (green)
Lights up when Draft Quality is selected using Font button.
HSD speed is selected if LQ, NLQ and Draft light off.
Buttons
Ready button
When the READY indicator is lit, pressing this button causes the temporary
stop of the printing job at the end of the current line; the READY indicator is
turned off.
When the printing is paused pressing this button the printing will be enabled
and the READY indicator is turned on
.
Load/Eject button
Press this button to load paper. If paper has already been loaded, pressing this
button will eject the paper. If the cut sheet is selected using path selection lever,
the printer ejects the paper forward; otherwise if the continuous paper is
selected, the printer ejects the paper backward to the standby position.
LF/FF button
Feeds paper line by line when pressed shortly, ejects a single sheet or advances
continuous paper to the next top of form position when held down.
Shift button
Hold down this button while pressing another button at the same time, the
printer can accomplish the following functions: