Compuprint 9058 - Manual (Page 18)

12
8. Turn the ribbon winding knob in the
arrow direction (located on the
cartridge) to take up slack in the
ribbon.
R ib b on Ten sion
K n ob
9. Push the cartridge down gently until it clips into place at all four locking points.
10. Turn the ribbon winding knob again in the direction of the arrow to take up slack in the
ribbon.
11. To ensure that the ribbon guide runs freely along the ribbon, manually move the print
carriage horizontally.
If you need to replace the used ribbon cartridge, see " Replacing The Ribbon Cartridge ", later in
this manual.