Compuprint 9058 - Manual (Page 30)

24
Message Description
QUIET PRINT OFF Printing at normal noise level.
QUIET PRINT ON Printing at reduced noise level
RELEASE KEY This message is displayed when you can release the PROGRAM key in the
Self-test selection or in the Power-on Configuration procedure.
RESET & BREAK When the input buffer is cleared an a break (250 msec.) on a serial
interface is sent pressing the
PROGRAM and then the ON LINE keys.
SELF TEST The printer is printing the self-test page.
SHIFT FUNCTION This message appears to indicate that the Shift functions of the operator
panel keys have been selected pressing the
SHIFT key.
TEAR IF NECESS.
PARK PAPER These messages are displayed when the printer receives a paper parking
command. Tear off the fanfold then press the
PARK key to park the paper.
TEAR IF NECESS.
EJECT PAPER These messages are displayed when the printer receives a paper parking
command and the TEAR NO is selected for the tear-off function. Tear off
the fanfold then press the
PARK key to park the paper.
TEAR OFF PAPER
PARK PAPER These messages are displayed when the printer receives a paper parking
command but was not able to execute it, because the paper to be parked is
longer than 18 inch. Tear off the fanfold paper and then press the
PARK
key to park the paper.
TEAR OFF PAPER
EJECT PAPER These messages are displayed when the printer receives a paper ejecting
command (TEAR NO has been selected for the tear-off function) but was
not able to execute it, because the paper to be ejected is longer than 18
inch. Tear off the fanfold paper and then press the
PARK key to eject the
paper.
UNLOCKED MENU When the access to the Printer Setups has been unlocked at the power on,
the printer displays this message.
For the error messages see "Error Handling" later in this manual.