Compuprint 9058 - Manual (Page 90)

84
Passing over to the Power-On Configuration
At this point of the menu, it is possible to pass over to the Power On Configuration Functions
Setting.
NEXT MACRO NO
↑
CONFIG MENU NO → or ← CONFIG MENU YES
↓ ↓
HEX DUMP NO PARALL INTERFACE
These items are self-explaining.
Hexadecimal Dump
CONFIG MENU NO
↑
HEX DUMP NO → or ← HEX DUMP YES
↓
TEAR ADJUST: xxxx
If you select HEX DUMP YES, press the PROGRAM key to set this item. The hexadecimal printing
continues, until the HEX DUMP NO item is selected, entering again into the Program Setup.