Comtech EF Data DMD1050 - Manual (Page 106)

DMD1050 Satellite Modem Board Web Browser
MN-DMD1050 7–12
Revision 9
Table 7-5. SNMP Parameters
SNMP VERSION: V1 & V2
TRAP VERSION: V1
AUTHORIZATION: TRAPS OFF
RD COMMUNITY: PUBLIC
RDWR COMMUNITY: PUBLIC
USER 1
Viewer-md5
USER 2
Viewer-sha
USER 3
Oper-md5
USER 4
Oper-sha
ACCESS GROUP
VIEWER
ACCESS GROUP
VIEWER
ACCESS GROUP
OPER
ACCESS GROUP
OPER
AUTH PASSWORD
Viewer
AUTH PASSWORD
Viewer
AUTH PASSWORD
Oper
AUTH PASSWORD
Oper
PRIV PASSWORD
Viewer
PRIV PASSWORD
Viewer
PRIV PASSWORD
Oper
PRIV PASSWORD
Oper
AUTHENTICATION
MD5
AUTHENTICATION
SHA
AUTHENTICATION
MD5
AUTHENTICATION
SHA
PRIVACY
DES
PRIVACY
DES
PRIVACY
DES
PRIVACY
DES
Table 7-6. FTP Parameters
USER ID: USER
PASSWORD: PASSWORD
Table 7-7. Web Parameters
Confirmation: disabled
USER 1
guest
USER 2
oper
USER 3
admin
ACCESS GROUP
guest
ACCESS GROUP
oper
ACCESS GROUP
admin
AUTH PASSWORD
guest
AUTH PASSWORD
oper
AUTH PASSWORD
admin
Table 7-8. Terminal and Remote Port Parameters
Type VT100
baud rate 19200
interface rs232
remote control terminal
NON-VOL: Stores and uses IP Mask and addresses as provided by the user.
BOOTP: At boot time, use Bootp Protocol to get names, masks, and IP Addresses of the
modem, router, and server.