Comtech EF Data DMD1050 - Manual (Page 27)

MN-DMD1050 3–1
Revision 9
Chapter 3. Theory of Operation
3.1 DMD1050 Hardware
The DMD1050 is based on a two printed circuit card design. The standard configuration consists
of an L-Band Assembly and a Digital Baseband Assembly. This configuration includes built in
Data interfaces and a number of different software upgrade options. A block diagram of the
DMD1050E is shown in Figure 3-1.
Figure 3-1. DMD1050 Block Diagram
L - Band
IF
Card
Digital
Baseband
Card
( Interface & Turbo )
Cable