Comtech EF Data DMD1050 - Manual (Page 160)

DMD1050 Satellite Modem Board Web Browser Setup Guide
MN-DMD1050 D–6
Revision 9
D.5 WEB Users Setup and Configurations Controls Options
We use authentication and authorization together with a user database and a Security Realm to
design a secure site. This makes use of users and groups, where users are generally people that
may access the system, and groups represent the position that users can hold.
The web user database consists of three users, with initial default names of guest, oper, and
admin. Access rights and authentication make it possible to restrict/control access to a specified
set of web users. Any of the three user names can be modified. The user name can have up to 14
characters supporting alpha and numeric characters. Alpha characters can be entered using the up
and down arrow keys. Numeric characters can be selected by using the number keys.
Web User Authentication
Password
Access
Group
guest guest GUEST
oper oper OPER
admin admin ADMIN
Some of those selections are also available to a properly authenticated user with ADMIN
privileges. Refer to Figure D-6.
1. From the modem introduction page, click the ADMINISTRATION tab.
2. If not already logged on, enter your username and password on the logon popup, and then press
the Enter key.
3. Select USER1, USER2, or USER3 from the drop down Edit User menu. The corresponding
username and access rights will get updated on the screen.
4. Select a new username if desired, and password. Confirm the new password then click on the
Save button.
5. Click on the Cancel button at any time to abort and reload the current user settings.