Comtech EF Data DMD1050 User Manual
Page 136
DMD1050 Satellite Modem Board
Web Browser
MN-DMD1050
7–42
Revision 9
+3.3V Supply
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +3.3 Volt power bus
located inside the modem.
+5V Supply
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +5 Volt power bus located
inside the modem.
+12V Supply
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +12 Volt power bus located
inside the modem.
+24V Supply
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +24 Volt power bus located
inside the modem.
RESET LATCHED ALARMS
Clicking on this button will reset (Clear) all Latched
Alarms
Alarms / Backwards Menu
Figure 7-25. Alarms / Backwards Menu
IDR ALARMS
IDR Backwards #1
SAT Alarm:
{Pass/Fail, Unmasked/Masked}
IBS and IDR Backward Alarms are only available via User Interface i.e.
Web Browser, SNMP, Terminal Screens and RLLP. There are no physical
contacts available for the backward alarms.
IMPORTANT