Comtech EF Data DMD1050 - Manual (Page 129)

DMD1050 Satellite Modem Board Web Browser
MN-DMD1050 7–35
Revision 9
Monitor / Eth Link Status Menu
Figure 7-20. Monitor / ETH Link Status Menu
Total Packets: Displays the total number of Ethernet packets received from the
satellite (Only visible when Ethernet is selected as the interface
type).
Error Packets:
Displays the number of erred Ethernet packets received from the
satellite (Only visible when Ethernet is selected as the interface
type).
PKT Error Rate:
Displays the satellite Packet Error Rate (Only visible when
Ethernet is selected as the interface type).
Reset Ethernet Packet Stats:
Allows the user to reset the Ethernet packet statistics by pressing
this button (Only visible when Ethernet is selected as the
interface type).
PORT 1 STATUS {See the note above}
Displays the current status of LAN Port 1.
The status of the following ports may be one of the following:
Down: The link is down.
Unresolved:
Unable to agree on connection speed.
10 Mbps Half: Connected at 10 Base-T Half Duplex.
10 Mbps Full:
Connected at 10 Base-T Full Duplex.
100 Mbps Half: Connected at 100 Base-T Half Duplex.
100 Mbps Full: Connected at 100 Base-T Full Duplex.
Unused: The port is not available.
IMPORTANT