F.2 point-to-point applications, Figure f-1. point-to-point applications – Comtech EF Data DMD1050 User Manual
Page 168
Advertising

DMD1050 Satellite Modem Board
Ethernet Data Interface
MN-DMD1050
F–2
Revision 9
F.2
Point-to-Point Applications
Figure F-1 illustrates a typical application connecting a remote office to the corporate
headquarters via satellite. Because the EEI places no restrictions on the IP addresses or subnet
masks chosen for a particular implementation, there is no lengthy setup required and no need to
change any existing network configurations. Simply connect the WAN port of each router to the
Modem and your satellite network is up and running.
DMD20
HQ
Router
DMD20
Remote
Router
Firewall
Internet
Corporate
LAN
Remote
LAN
Figure F-1. Point-to-Point Applications
Advertising