Comtech EF Data SDM-300L3 - Manual (Page 112)

SDM-300L3 Satellite Modem Revision 1
Front Panel Operation MN/SDM300L3.IOM
4–44
FUNCTION SELECT: CONFIGURATION: INTERFACE:
ASYNC TX STOP (CONDITIONAL)
ASYNC TX STOP
2 BITS
IMPORTANT
Conditional: The menu is only available when Modem Type = ASYNC
and requires that the Overhead Card is installed.
Programs the ASYNC overhead transmit stop bits for 1 or 2.
Upon entry, the current status of the ASYNC TX stop bits is displayed. Press [
↑ ] or [ ↓ ]
to make the selection. Press <ENTER> to execute the change.
FUNCTION SELECT: CONFIGURATION: INTERFACE:
ASYNC RX STOP (CONDITIONAL)
ASYNC RX STOP
2 BITS
IMPORTANT
Conditional: The menu is only available when Modem Type = ASYNC
and requires that the Overhead Card is installed.
Programs the ASYNC overhead receive stop bits for 1 or 2.
Upon entry, the current status of the ASYNC RX stop bits makes the selection. Press
<ENTER> to execute the change.