Comtech EF Data SDM-300L3 - Manual (Page 181)

SDM-300L3 Satellite Modem Revision 1
Front Panel Operation MN/SDM300L3.IOM
4–113
FUNCTION SELECT: UTILITY: SYSTEM: YEAR DISPLAY
YEAR DISPLAY
2 - DIGIT
Displays the year in either 2-digits or 4-digits.
To change the remote address, press <ENTER>. Press [
↑ ] or [ ↓ ] to make the selection.
Press <ENTER> to execute the change.
FUNCTION SELECT: UTILITY: SYSTEM: TEST MODE STATUS
TEST MODE STATUS
_ _ _ _ _ _ _ _
Test mode status indicator. The following modem test points are listed and display a “+”
when a test mode is active:
• RS CORR OFF
• INTRFC LOOP BACK
• B-BAND LOOP BACK
• CARRIER MODE
• RX 2047 Pattern (requires Overhead card)
• TX 2047 Pattern (requires Overhead card)
• IF LOOP BACK
To view the test modes, press <ENTER>. Press [
↑ ] or [ ↓ ] to make the selection.
FUNCTION SELECT: UTILITY: SYSTEM: LAMP TEST
LAMP TEST ??
PRESS ENTER
Lamp test function. Press <ENTER> to turn the front panel indicators on for 3 seconds.