Function select: modem type: configuration code, Configuration code – card #3 – Comtech EF Data SDM-300L3 User Manual
Page 195
SDM-300L3 Satellite Modem
Revision 1
Front Panel Operation
MN/SDM300L3.IOM
4–127
Comtech EF Data-supplied code. Press <ENTER>
1)AAAAAAAAAA
2)AAAAAAAAAA
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
←
] or [
→
] to move the flashing cursor. Press [
↑
] or [
↓
] to increment or
decrement the digit at the flashing cursor. Press <ENTER>
to execute the change.
Entering this code enables the corresponding modem option. To purchase an option,
contact an Comtech EF Data marketing representative for more information
FUNCTION SELECT: MODEM TYPE:
CONFIGURATION
CODE
–
CARD #3 (CONDITIONAL)
CONFIGURATION
CODE – CARD #3
Comtech EF Data-supplied code. Press <ENTER>
IMPORTANT
This menu appears only if the Overhead card is installed.
1)AAAAAAAAAA
2)AAAAAAAAAA
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
←
] or [
→
] to move the flashing cursor. Press [
↑
] or [
↓
] to increment or
decrement the digit at the flashing cursor. Press <ENTER>
to execute the change.
Entering this code enables the corresponding modem option. To purchase an option,
contact an Comtech EF Data marketing representative for more information.