Comtech EF Data SDM-300L3 - Manual (Page 87)

SDM-300L3 Satellite Modem Revision 1
Front Panel Operation MN/SDM300L3.IOM
4–19
FUNCTION SELECT: CONFIGURATION: DEMODULATOR:
RX TERMINAL FREQUENCY (CONDITIONAL)
RX TERMINAL FREQUENCY
4200.0000 MHz
IMPORTANT
Conditional: This menu is available only when RX Terminal LO and Mix
are programmed under Utility: Demodulator menu.
The reminder of the functions is the same as RX-IF Frequency.
Note: This permits programming of the RX frequency of the satellite terminal, including
the modem and LNB. When properly setup it indicates the satellite frequency of the
desired RX carrier received from the satellite.
FUNCTION SELECT:CONFIGURATION:DEMODULATOR:
DESCRAMBLER
DESCRAMBLER
ON
Programs the descrambler On or Off.
Upon entry, the current status of the descrambler is displayed. Press [
↑ ] or [ ↓ ] to make
the selection. Press <ENTER> to execute the change.