Entone Hydra II - Manual (Page 20)

Hydra User’s Guide
Copyright     2007 Entone, Inc. All rights reserved . 18
CONNECTING THE PRIMARY TV USING COMPONENT
1. Acquire the required cable. RCA Component cables are not packaged with the Hydra. Before
purchasing the cable, consult the TV owner’s manual to confirm that the TV supports the video signal
output that you plan to use.
2. Connect the 3-color component video cables (Green, Blue and Red) and composite audio cables (Red
and White) to the Hydra.
3. Connect the opposite end of the video and audio cables to the matching input in the TV.
4. Plug in the TV and turn on the power using your TV remote control. Use the TV remote control to select
the respective video input that is connected to the Hydra. Consult your TV owner’s manual for
instructions as required.
5. Plug in the Hydra and turn on the power.
6. You should now see the output from the Hydra on the TV screen.
Figure 4-4 Connecting Primary TV using Component and Composite Audio
NOTE: All A/V outputs are always connected to decoder 1.