Entone Hydra II - Manual (Page 38)

Copyright     2007 Entone, Inc. All rights reserved
36
Chapter
14
14.1 Hydra User Menu
The Hydra User Menu is an on-screen setup menu to set up your Hydra features. You need to connect the
TV properly before using the User Menu.
Each decoder has its own User Menu. Currently, the User Menu of the three decoders provides the same
TV channel ID setup feature.
The User Menu provides the following setup features:
Table 14-1 User Menu Features
Decoder 1 Decoder 2 Decoder 3
TV 1 Channel ID √
(Valid Channel ID)
√
(Valid Channel ID)
√
(Valid Channel ID)
TV 2 Channel ID √
(Valid Channel ID)
√
(Valid Channel ID)
√
(Valid Channel ID)
TV 3 Channel ID √
(Valid Channel ID)
√
(Valid Channel ID)
√
(Valid Channel ID)
To start the User Menu:
1. Use the corresponding remote control of the decoder.
2. Press “INPUT” and then “MENU” in sequence within 1 second.
Figure 14-1 Triggering the User Menu