Entone Hydra II - Manual (Page 36)

Copyright     2007 Entone, Inc. All rights reserved
34
Chapter
12
12.1 Caller ID Display
The Hydra can display caller ID information of an incoming telephone call on TV. In order to enjoy this
service, your telephone line and TV service must have caller ID already set up. Check with your telephone
and TV service provider on how to enable caller ID service.
To set-up your Hydra for caller ID service:
1. Connect the telephone line to the “TO LINE” jack on the rear panel. Telephone wire comes packaged
with the Hydra. You may connect directly to the telephone line socket if one is available. If your
telephone line socket is already connected to an existing phone, use a splitter.
2. For details of setting up and using the caller ID service, consult your TV service user guide.
Figure 12-1 Connecting Hydra for Caller ID Display