Entone Hydra II - Manual (Page 28)

Hydra User’s Guide
Copyright     2007 Entone, Inc. All rights reserved . 26
USING THE HYDRA CONTROLS
Hydra is equipped with specially designed remote controls. The remote controls use radio signals to control
the Hydra operations. These radio signals travel over long distances and go though walls and other solid
objects. You must connect the RF Remote Control Antenna to the rear panel of the Hydra.
The Hydra comes with three remote controls. (Additional remote controls can be purchased separately.)
The remote controls must be registered to one of the three decoders before it can be used. One remote
control can only be registered to one decoder. However, you can register at most 3 remote controls to a
decoder. After registration, you need to use the corresponding remote controls to control the decoders.
Figure 9-2 Controlling Hydra using RF Remote Control