ESI Waveterminal 192L - Manual (Page 24)

ESI Waveterminal 192
25
5. Analog 5,6 Output/Headphone Out (stereo)
This is stereo analog output. Same as Analog 1 2 / 3 4, this output use stereo TRS phone
plug. Analog 5,6 send out the signal indicated as ‘3-waveterminal 192 2ch’ on
application’s device set up. This output port is also used as headphone connector.
Waveterminal 192L provides high quality headphone amp.
6. SPDIF Optical Out/AC3(Dolby digital)
This port can transfer 192L’s audio data without loss, directly to a DAT, MD, CD-
recorder, which support digital connection.
This port sends out the signal indicated as ‘4-waveterminal 192 2ch’ on application’s
device set up, and also sends out AC3 encoded Dolby Digital signal.
When you playback DVD title on a software DVD player, you can easily make surround
sound environment using the port and AV receiver with decoder.
In this case, software DVD player and DVD title must support AC3 digital thru function.
Caution:
When you use Waveterminal 192L with Optional add-on card MI/ODI/O, you can get
not only Optical out, also Optical input and Coaxial In/Output. In this case, you need to
select Digital out on 192L’s control panel.
Caution:
Although 192L’s Tos-Link Optical I/O port can’t support 192kHz in specification, we
got the reports shows possibility while we were testing. However, it heavily depends on
system environment, It may have problem on over 100kHz sample rate. You have to use
high quality Optical cable otherwise you may get loss of data or distortion.
7. MI/ODI/O connector (sold separately)
This connector is for connecting optional MI/ODI/O add-on card.
MI/ODI/O add-on card makes Waveterminal 192L a total of 4 in 8out Audio / 16 MIDI
channel integrated audio interface.