ESI Waveterminal 192L - Manual (Page 53)

ESI Waveterminal 192
54
2. Waveterminal 192L
1. Input type : Analog Mic_IN - 1 Channel(1/4" TRS phone plug)
Analog Line_In - 2 Channel (Stereo 1/4" TRS phone Plug)
2. Output Type : Analog Out - 6 Channel (3 Stereo 1/4" TRS phone Plug)
Digital Out - Optical Out (TOS-LINK)
3. Input LEVEL +4dBu Unbalanced, +4dBu Nominal, +17dBu Max
4. Output LEVEL +4dBu Unbalanced, +4dBu Nominal, +16.5dBu Max
5. Input Impedance : Mic in 10K ohm
Line in 10K ohm
6. Output Impedance : 100 ohm
7. Output Attenuation : Digital -96dB ~ 0dB, 0.75dB Step Size(with Mute)
8. A/D Spec
1) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96 KHz
2) Dynamic Range (S/N) : 100 dB A-Weighted (Typical)
3) Frequency Response : 20 ~ 22.5KHz (@ fs=48kHz)
4) Resolution : 24 Bits
9. D/A Spec
2) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 KHz
2) Dynamic Range (S/N) : 104dB A-Weighted (Typical)
3) Frequency Response : 20 ~ 22.5KHz (@ fs=48kHz)
4) Resolution : 24 Bits
10. Digital Out Spec
1) Type : Optical connector (TOS-LINK)
2) Format : IEC-958 Consumer(S/PDIF),
IEC-958 Professional(AES/EBU)
3) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96 KHz
4) Resolution : 24 Bits
11. Mic PreAmp Spec
1) Mic Input Gain : +25dB Fix and 0dB ~ 22.5dB Variable
(1.5dB Step Size)
2) Phantom Power : +12V Phantom Power
12. Headphone Amp Spec
1) Output Power : 60mW Max
2) Signal to Noise Ratio: 110dB (Typical)
3) (THD+N)/S : -70dB, 0.03% (Typical)