ESI Waveterminal 192L - Manual (Page 26)

ESI Waveterminal 192
27
1. SPDIF Optical Input (24bit/96kHz)
Using this Optical input port with Waveterminal 192X & L’s Optical output, you can
use Optical In/Out with external device.
Caution:
Although MI/ODI/O’s Tos-Link Optical I/O port can’t support 192kHz in specification,
we got the reports shows possibility while we were testing. However, it heavily depends
on system environment, It may have problem on over 100kHz sample rate. You have to
use high quality Optical cable otherwise you may get loss of data or distortion.
2. External connector port
This port is for connecting MI/ODI/O add-on card to Waveterminal 192 series.
MI/ODI/O add-on card makes Waveterminal 192L a total of 4 in 8out Audio / 16 MIDI
channel integrated audio interface.
This port is connecting for the exclusive external connection cable. This cable is
provided with the MI/ODI/O.
As next picture, the cable consists of total of 5 connectors. On one end, there is an 8-pin
connector to MI/ODI/O. The other end, there are two small connectors for SPDIF
digital In/Out port and large connectors for MIDI interface In/Out. These 4 cables are
labeled for easier distinction.